Our Products

Green products for better results

Better air quality is a critical component to a sustainable and healthy lifestyle. The presence of mold can be more than a little nuisance - it can prove to be hazardous. The problem is, up until now, many of the solutions used to combat mold and other microbials were themselves a hazard. By emitting dangerous VOCs and leaching toxic compounds, many traditional cures were little better than the affliction.

Mold Solutions offers you a better, greener solution

When you choose Mold Solutions for your mold remediation or prevention, you can trust that you are making a smart choice - not only for your health, but also for the environment. Our products are a recognized component of the LEED green building rating system developed by the United States Green Building Council (USGBC), which means that they offer you a safe and effective, solution to any mold problem.

Our products are water-based

MPI Antimicrobial's water-base means the only off-gas released upon surface bonding is H20 - there are no toxic gases, no VOCs, no heavy metals, no formaldehyde or phenol groups - only H20. This translates into a safe, clean and green mold solution.

Our products are non-leaching

Unlike conventional antimicrobials that can leach toxic active ingredients into the surrounding environment, MPI Antimicrobial does not leach or dissipate. In fact, its active ingredient has the EPA's lowest toxicity rating. Once bonded to the surface, MPI Antimicrobial is there to stay. In addition, because MPI Antimicrobial has a benign mode of action and does not actively leach or poison microbes, there is no risk of adaptive microorganisms or "superbugs." In laboratory testing, the MPI Antimicrobial antimicrobial has never been shown to allow or cause microbial adaption, resistance or mutation.

Learn more about the products Mold Solutions uses for mold prevention and remediation below. Then contact us to schedule your consultation! Our trained experts will evaluate your individual mold situation and provide you with the best mold removal or preventative course of action.

MPI Antimicrobial

Mold Removal ProductBased on chemistry that was developed by Dow Chemical, MPI is an amino-functional silane (Si-QAC) formulated to create a built-in antimicrobial/antibacterial surface barrier that gives building materials the ability to inhibit the growth of mold, mildew and bacteria.

Unlike conventional antimicrobials that must leach or migrate from the surface in order to work, MPI’s non-leaching technology is permanently bonded to the surface, meaning strength and efficacy will not diminish over time.

This water-based product is safe and easy to use and contains 5%, 3-(trihydroxysilyl) propyldimethyl-octadecylamine ammonium chloride.

MMR (mold & mildew stain remover)

Mold Stain RemoverMMR is a commercial grade, proprietary blend of EPA registered ingredients. This mildew and mold stain remover is formulated to immediately remove mold and mildew stains present on wood and other hard surfaces. Fast and easy application that eradicates mold stains on contact. MMR penetrates soiled areas almost instantly, leaving surfaces clean and free from mold stains. MMR is biodegradable and non-flammable.

Why Use MPI Antimicrobial?

  • Surface Modifying Nanotechnology
  • Have an unmatched safety profile
  • Insoluble (will not wash off)
  • Won't leach onto other surfaces
  • Won't volatilize (or give off gases)
  • Won't be consumed or absorbed
  • Remain a permanent part of surface (unless abraded off or covered)
  • Odorless and colorless
  • 29-year history of safety, durability and effectiveness
  • Have been used since 1985 as an "on-site" treatment to dramatically reduce the environmental microbes
  • Prevent microbial colonization and reduce transient microbial levels
  • Do not dissipate over time (always working at full strength)
  • Can be used on interior finish surfaces (carpets, walls, furniture, etc.)
  • Provide a Broad Spectrum Control (Fungi, Mold, Mildew, Gram(+)/Gram(-), Bacteria, Yeasts and Algae)
  • Act as a continuous agent to control and kill micro-organisms
  • Retail and OEM antimicrobials
  • 3 U.S. Patents
  • 7 foreign patents pending
  • Developed by Dow Corning and Emory University and are currently used in a variety of medical, consumer and numerous other products, worldwide

You may already have mold growing around you! Learn more about the dangers of mold now, and contact us for a consultation today!

Contact us today for an inspection and consultation for our professional mold removal and prevention solutions!

The Preferred Solution to Mold

Don't wait any longer – protect your family, your employees, your children, and all who visit your establishment from the dangerous effects of mold.

Mold Solutions Chicago Mold Solutions Chicago on Angies List