RETURN HOME
 
Microbe Guard

Protected By Microbe Guard from Yeast, Algae, Bacteria, Viruses and Fungi




With Mold Solutions' 25 Year Warranty on all new construction treatments you can rest easy knowing that your new home will be protected from mold colonization and will remain a healthy place for you and your family to live. The manufacturer, Microbe Guard, will repair or replace surfaces damaged by microbes resulting from product failure.


Certified Technicians thoroughly inspect each facet of the home, carefully noting any area of concern as it relates to existing mold, water intrusion, open windows, visible leaks, and excess moisture. A detailed report of these valuable findings is provided to the builder. In the event existing mold is discovered, it is eradicated by the use of our exclusive "Mold Blast" treatment that kills mold and removes mold stains on contact.


Meticulous HEPA vacuuming is essential to the proper application of Microbe Guard EPA registered Antimicrobials. Mold Solutions technicians are trained to search for areas where sawdust and other minor particles would otherwise go unnoticed. The use of HEPA vacuums minimizes the transference of collected particles. Special attention is given to all exterior wall cavities under any opening where water intrusion could occur.


All windows, doors, shower stalls, bathtubs or other areas where an antimicrobial could adversely affect the "finish" are meticulously protected with poly. This painstaking process ensures that our Microbe Guard treatment will in no way affect any shiny surface or permanently seal in dirt, fingerprints or other unwanted marks.


Our certified technicians are thoroughly trained in the art of applying antimicrobials. Areas where water intrusion might be a factor, such as cavities beneath windows, bathrooms, under sinks, doorways, basements, etc. receive special treatment.


A thorough post completion inspection is conducted to ensure there was a complete application of antimicrobials. Our certified technicians then remove all poly/tape, warning signs, and any other equipment or materials they brought to the job site. A completion certificate is then handed over to the builder with the certification number of the authorized technician who performed the services.

The EPA registered Microbe Guard Antimicrobial is protected by three United States and seven international patents. When our antimicrobial is applied by our trained professionals to uncontaminated surfaces, this treatment will inhibit microbe contamination and related damage from occurring. Unlike other biocides, the treatment does not dissipate or leach off. There is no chance for microorganisms to adapt, build up tolerance, or become resistant to the formula. A chemically bonded antimicrobial treatment to all interior wood surfaces in the structure will kill and prevent the growth of microbes on that structure. Mold Solution's treatment can be applied to virtually any surface including: concrete, wood, insulation products, tile grout, and cementitious setting beds for fabric, textiles and other materials. Microbe Guard’s Technology exhibits long lasting efficacy against a broad spectrum of microorganisms.

Why Use Microbe Guard Antimicrobial?

  • Surface modifying nanotechnology
  • Insoluble - will not wash off or leach onto other surfaces
  • Won't volatilize - give off gases
  • Won't be consumed or absorbed - remains a permanent part of a surface unless abraded or covered
  • Odorless and colorless
  • Has a 29-year history of safety, durability and effectiveness
  • Has been used since 1985 as an "on-site" treatment to dramatically reduce environmental microbes
  • Prevents microbial colonization and reduces transient microbial levels
  • Does not dissipate over time - always working at full strength
  • Can be used on interior finish surfaces - carpets, walls, furniture, etc.
  • Has an unmatched safety profile
  • Provides broad spectrum control of fungi, mold, mildew, bacteria, yeasts and algae
  • Acts as a continuous agent to control and kill microorganisms
  • Developed by Dow Corning and Emory University and is currently used in a variety of medical, consumer and numerous other products worldwide

BUILDERS' COMMON ERRORS

  • Storing materials in the elements
  • Using materials with visible mold or high moisture content
  • Lack of supervision
  • Not inspecting lumberyard delivery
  • Ordering materials too far in advance
  • Not removing plastic

OTHER FACTS ASSOCIATED WITH
NEW CONSTRUCTION

  • The average home contains 6,000-9,000 gallons of water during construction.

  • The average 2x6 was a living tree only 30-40 days ago.

  • There are over 10,000 mold lawsuits filed every year, with tens of thousands pending.

  • Insurance Industry paid over 3 billion dollars in mold claims in 2001, and over 600 million dollars in 2002.

  • The average cost of a mold lawsuit: builder $50k, homeowner $25k, settlement $150k.

  • Mold or water damaged homes double the likelihood
    of a child developing asthma    .

  • The NAHB (National Association of Home Builders) announced that 28% of builders have mold issues during construction.

Copyright® 2007
MOLD SOLUTIONS
All Rights Reserved.

Call Now For Your Mold Solution   866 952-MOLD (6653)     
Serving Cook, Will, DuPage, McHenry, Grundy, Kane and Kankakee Counties.